For 3D Net Bags Bed Mattress Hot Melt Adhesive With Nice
Adhesive for nonwoven to nonwoven, nonwoven to sponge , 3D net bags
to 3D net bags and so on. Suitable for automatic fast aped machines
and semi automatic manual sticking with good melting properties ,
high adhesive strength , nontoxic , excellent high-temperature
performance (at temperature of -15 to +75 degrees Celsius).
All material is in accordance with 21CFR175.105,stipulation of FDA.
Complying with HJ/T220-2005,and enjoy the SGS Certificate.
Appearance :white granule
Softening point (R&B):75±2°C
Open time: 15—20 second Viscosity:1500±500CPs/165°C
Setting time: 10—15 second
Suggested running temperature:165-175°C
Storage: Storage in a clean, dry area.
Storage cycle:18 months.
Wear goggles and adiabatic gloves when working around hot melt
machine . If the plant line stops for over 2 hours, the glue
temperature should be tuned down below 120°C or turn off the
machine. Regularly maintaining and cleaning machine.
- Suggested service temperature 150~170°C, avoid processing upon high
temperature (≥180°C) for long time;
- Please adjust temperature of adhesive dissolving tank and speed of
glue binding machine in time base on different operation status
(include environmental temperature, fluidity and gluing time of
- Clean up leftover and impurity in adhesive dissolving tank
- Do not mix with other glue from different producer;
- Avoid using glue that out of season, especial for avoid glue that
produces in summer used in winter, as well as glue that produce in
winter could not be used in summer.
1. Own factory , raw material and equipment , which makes it
perfect and trust worthy for saving your cost.
2. Samples send to you freely
3. Delivery on time, quality according to customer request
4. OEM, ODM is welcome
5. Support small wholesale, retails. Any inquires will be replied
within 24 hours.